|
|
Product Detail
|
|
|
 |
| Item#: |
DA8807 |
|
|
|
| Type Use: |
|
| Units/Case: |
1 |
| Wt Each: |
1.00 |
|
|
|
| Other Important Information About This Product |
|
|
|
Related Product:
|
|
|
Substitute Product:
|
|
|
Use This Product With:
|
|
Air Line Tubing 500' roll
|
|
|
|
|
|
|
| Product Name: |
Aqua Supreme Air Pump AP-4 4 watt 2 Outlet
|
|
| Category: |
Aeration* |
|
| Subcategory: |
Air Pumps |
|
| Manufacturer: |
Danner |
|
|
|
|
4watt Adjust 2 Outlet
·Energy-efficient, super-quiet recirculating air pumps easily aerate single or multiple aquariums
· 4 convenient air pump sizes are ideal for most fresh and saltwater aquarium applications
· 4W and 8W air pump models let you adjust air flow as desired
· Easy-to-use air pumps accept standard airline tubing and need no motor lubrication
Energy-efficient recirculating Aqua-Supreme Air Pumps in 4 convenient sizes easily aerate single or multiple aquariums. Aqua-Supreme air pumps are ideal for most fresh and saltwater aquarium applications. In addition to aerating single or multiple aquariums, Aqua-Supreme air pumps are great for oxygenating indoor ponds and water gardens, aerating single or multiple terrariums, and oxygenating indoor water features.
4W and 8W Aqua-Supreme air pumps let you adjust air flow as desired. Easy-to-use Aqua-Supreme air pumps accept standard airline tubing. Advanced design and soft rubber feet ensure quiet operation. Air pump motor needs no lubrication. These pumps are UL-listed.
The AP-Series air pumps have been designed to satisfy the requirements of a multitude of water-related applications. These beautifully designed, environmentally friendly pumps can be used for:
·Aerating single or multiple aquarium tanks
·Oxygenating hydroponic nutrients
·Oxygenating indoor ponds and water gardens
·Aerating single or multiple terrarium tanks
·Oxygenating indoor water features
Operation and installation tips
All AP-Series air pumps operate on standard 110V electric. They have been designed to operate efficiently with a motor that is non-lubricated, and have no user-serviceable parts. They are designed for indoor and household use only. To prevent possible electric shock resulting from water back siphoning, locate air pump higher than water level. AP-Series pumps are not designed to work submerged - do not place in water. When placing airline tubing in your setup, avoid sharp turns or kinks that can cause excessive backpressure and decreased airflow.
The AP-4 and AP-8 models include a variable output control knob on the pump top. Regulate air output simply by turning this control knob.
Maintenance tips
A small air filter is located on the underside of the pump. Periodically remove, rinse, dry, and reinstall this filter to ensure optimal performance.
If pump volume decreases or stops, check the following:
·Airline tubing may be kinked. Straighten tubing or install new tubing if necessary.
·Airstone may be clogged. Replace airstone if necessary.
·Air filter may be dirty. Remove, clean, dry, and reinstall.
·Plug is not secure in outlet. Check all electrical connections.
·Internal diaphragm is worn. Please contact the manufacturer for replacement diaphragm kit. |
|
|
|
|
|
