|
|
Product Detail
|
|
|
 |
| Item#: |
GU116 |
|
|
|
|
|
|
|
| Product Name: |
Mag-Float Pad & Felt Replacement for Acrylic Aquariums up to 350 Gallons
|
|
| Category: |
Maintenance & Cleaning* |
|
| Subcategory: |
Cleaning Supplies |
|
| Manufacturer: |
Gulfstream Tropical Aquarium |
|
|
|
|
Replacement pad for the Float-360A
Floating acrylic aquarium cleaner
Have you used your Mag-Float so much that the velcro has started to wear out? We understand. It is a wonderful product, and the magnet may last forever but the felt/velcro will not! The good news is you don't have to go out and replace the whole thing. This is the replacement pad and felt for your Mag-Float.
(Note: Contains 1 pad and 1 felt)
Felt is applied to the magnet that contains logo Mag-Float.
Pad is applied to the magnet that does not contain the Mag-Float logo.
Instructions for use:
1. Remove old pad/felt entirely without damaging the plastic surface of the magnet.
2. Apply mineral spirits on a cloth and rub plastic surface until all excess glue is cleared (use latex gloves).
3.Wait until plastic surface is completely dry before applying new felt/pad.
4.Peel back paper backing from new pad/felt approximately a quarter of the way.
5.Line up the new pad/felt with the plastic surface area of the magnet.
6.Apply pressure to the pad/felt area that has been peeled off so it glues on to the plastic surface of the magnet.
7.Apply pressure to the rest of the new pad while slowly removing the rest of the paper backing. (this will prevent air bubbles from forming between the plastic surface and the felt.) |
|
|
|
|
|
